+- IRSE Exam Forum (https://irse.signalpost.org)
+-- Forum: MODULES (https://irse.signalpost.org/forumdisplay.php?fid=3)
+--- Forum: Module 5 (https://irse.signalpost.org/forumdisplay.php?fid=8)
+---- Forum: General Circuit Design (https://irse.signalpost.org/forumdisplay.php?fid=67)
+---- Thread: signalling circuitry to do with signal and point control and indication, (/showthread.php?tid=404)
signalling circuitry to do with signal and point control and indication, - Archie - 18-05-2010
Hello again all, has anyone got any info on signalling circuitry to do with signal and point control and indication, any links would be very useful.
Many thanks
Archie
RE: signalling circuitry to do with signal and point control and indication, - PJW - 18-05-2010
(18-05-2010, 08:51 PM)Archie Wrote: Hello again all, has anyone got any info on signalling circuitry to do with signal and point control and indication, any links would be very useful.
Many thanks
Archie
I suspect that unless you have access to NR standards via your work somehow, then this would be a tall order. I can perhaps put some typical examples on the site but there are many and the size is large. However here is a signal output from an SSI module including a tee off to the ATP encoder shown on another sheet and the feed to the AWS via its transformer. Not sure how much use something like this is going to be to you though.....
RE: signalling circuitry to do with signal and point control and indication, - Archie - 19-05-2010
(18-05-2010, 10:45 PM)PJW Wrote:(18-05-2010, 08:51 PM)Archie Wrote: Hello again all, has anyone got any info on signalling circuitry to do with signal and point control and indication, any links would be very useful.
Many thanks
Archie
I suspect that unless you have access to NR standards via your work somehow, then this would be a tall order. I can perhaps put some typical examples on the site but there are many and the size is large. However here is a signal output from an SSI module including a tee off to the ATP encoder shown on another sheet and the feed to the AWS via its transformer. Not sure how much use something like this is going to be to you though.....
Cheers PJW
P.S. PJW what would these NR Standards be if I can source them through work?
RE: signalling circuitry to do with signal and point control and indication, - Peter - 19-05-2010
(19-05-2010, 05:37 AM)Archie Wrote: P.S. PJW what would these NR Standards be if I can source them through work?
They are called the T Series drawings. That should mean something to someone who has access to them.
RE: signalling circuitry to do with signal and point control and indication, - PJW - 19-05-2010
(19-05-2010, 08:15 AM)Peter Wrote:See attachment for Index(19-05-2010, 05:37 AM)Archie Wrote: P.S. PJW what would these NR Standards be if I can source them through work?
They are called the T Series drawings. That should mean something to someone who has access to them.
A couple of examples are posted to support some relevant pictures of clamplock points